Toshiba G7 Quick Start Manual page 19

Volts Per Hertz Setting
This function establishes the relationship between the output
frequency and the output voltage.
Settings:
Constant Torque
Variable Torque
Automatic Torque Boost
Sensorless Vector Control (Speed)
Automatic Torque Boost + Automatic Energy Savings
Sensorless Vector Control (Speed) + Automatic Energy Savings
V/f 5-point Setting (Opens 5-point Setting Screen)
Sensorless Vector Control (Speed/Torque Switching)
PG Feedback Vector Control (Speed/Torque Switching)
PG Feedback Vector Control (Speed/Position Switching)
Motor Current Rating
This parameter allows the user to input the full-load amperage
(FLA) of the motor. This value is used by the ASD to determine
the Thermal Overload protection setting for the motor.
Command Source
This selection allows the user to establish the source of the Run
commands (e.g., F, R, Stop, etc.).
Settings:
Use Control Terminal Strip
Use LED Keypad Option
Use Common Serial (TTL)
Use RS232/485
Use Communication Card
Frequency Reference Source
This selection allows the user to establish the source of the
Frequency (speed) command.
Use VI/II
Use RR
Use RX
Use Option Card RX2
Use LED Keypad Option
Use Binary/BCD Input
Use Common Serial (TTL)
Use RS232/485
Use Communication Card
Use Motorized Pot Simulation
Use Pulse Input Option
G7 ASD Quick Start Guide 15