Table of Contents
Advertisement
9.3.28
Menu "Settings" - "Display profile"
Fig. 68:
Display profiles
The menu is located in menu level "Settings". In this menu the different indications of the display
are selected.
With a profile selection from this menu you represent certain contents of the display enlarged.
Select from the following setting options:
Setting
Standard
Large letters
Large clock
Slide show
Table 17: Display profiles
Use the following steps to set the display profile:
1. Switch to menu item "Settings".
2. Switch to menu item "Display profile".
3. Use the "PLUS / MINUS" buttons to select the desired setting.
4. Confirm the selection with the "ENTER" button.
Product manual 2CKA001473B5281
Description
In standard operation the display is
shown in the standard view.
In the display of standard operation
the station name is shown in large
letters instead of the slide show.
In the display of standard operation
the time is shown in large numbers
instead of the slide show.
In the display of standard operation
the slide show is shown large after 20
seconds.
– When pressing the "ENTER"
button the display changes to the
standard view for approx. 20
seconds.
– During this time the "ENTER"
button has the normal function
again.
Operation
Display view of
standard operation
│82
Advertisement
Table of Contents
