Table of Contents
Advertisement
9.3.17
Menu "Bluetooth" – "Connect device"
Fig. 52:
Connect Bluetooth device
This menu is only visible when the Bluetooth mode in the settings is set on "Station, see chapter
9.3.16 "Menu "Bluetooth" - "Mode"" on page 68.
The menu is located in menu level "Bluetooth".
Via this menu you establish the connection from the flush-mounted radio to a Bluetooth
multimedia device (e.g loudspeaker, headphone).
Establishing a connection:
Use the following steps to establish the connection:
1. Switch to menu "Bluetooth".
2. Switch to menu item "Connect device".
3. Switch to the submenu of menu item "Connect device".
–
The device switches to the devices in the list that are already coupled. If no device is
displayed in the list, a device must first be coupled, see chapter 9.3.18 "Menu
"Bluetooth" – "Couple device"" on page 70.
4. Use the "PLUS / MINUS" buttons to switch to the desired coupled device.
–
All Bluetooth devices are displayed in the list. However, only the connection to the
Bluetooth receivers can be established.
–
Please ensure that the device to be coupled is switched on and Bluetooth
5. Confirm the selection with a brief press of the "ENTER" button.
–
The devices are connected with each other.
Product manual 2CKA001473B5281
Operation
®
is activated.
│69
Advertisement
Table of Contents
