Table of Contents
Advertisement
Favourite "AUX" is not visible
The AUX mode in the device is set on "AUX output" or deactivated.
■
–
To set the AUX mode of the device on "AUX input", see chapter 9.3.26 "Menu "Settings"
- "AUX"" on page 80.
Favourite "Bluetooth" is not visible
The Bluetooth mode in the device is set on "Station".
■
–
To set the Bluetooth mode of the device on "Receiver", see chapter 9.3.16 "Menu
"Bluetooth" - "Mode"" on page 68.
Nothing can be heard on the flush-mounted radio.
If the Bluetooth icon is permanently displayed on the flush-mounted radio, the multimedia
device is connected.
The multimedia device is currently switched off (time out not yet reached).
■
The mute function on the multimedia device has been activated.
■
The volume on the multimedia device has been turned down to "Zero".
■
The player software of the multimedia device in pause mode.
■
–
This could be the case especially after the connection has been temporarily disrupted.
You are at the boundary of the transmission range. While the signal is still strong enough to
■
maintain the connection, it is too weak to transmit sufficient data for playing music.
The multimedia device cannot be connected, even though the flush-mounted radio is
displayed in the Bluetooth settings.
A different multimedia device is already connected to the flush-mounted radio.
■
–
Disconnect and uncouple the connected multimedia device in the flush-mounted radio.
–
see chapter 9.3.19 "Menu "Bluetooth" – "Disconnect active device"" on page 71
–
see chapter 9.3.20 "Menu "Bluetooth" – "Uncoupling all devices"" on page 72
You must then couple and connect your multimedia device again because the list of
coupled devices stored in the flush-mounted radio has been deleted.
Product manual 2CKA001473B5281
FAQ and tips
│117
Advertisement
Table of Contents
