Cleaning And Routine Maintenance; Cleaning The Dryer; Technical Specifications - Hoover Vision HD Instruction Book

Hide thumbs Also See for Vision HD:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
40005197Eng.qxd
30/08/2007
To commence the programme press
appliance will complete the drying cycle at the
end of this time. The 6 or 9 hour indicator light
will flash to indicate that the start delay is in
progress.
Cleaning and Routine
Maintenance

Cleaning the dryer

Clean the filter and empty the water
container after every drying cycle.
Regularly clean the condenser.
After each period of use, wipe the inside of
the drum and leave the door open for a
while to allow circulation of air to dry it.
Wipe the outside of the machine and the
door with a soft cloth.
DO NOT use abrasive pads or cleaning
agents.
To prevent the door sticking or the build up
of fluff periodically clean the inner door and
gasket with a damp cloth.

Technical specifications

Drum capacity
Maximum load
Height
Width
Depth
Energy Label Band
13:08
Page 17
and the
115 litres
8 kg
85cm
60cm
60cm
B
WARNING!
The drum, door
and load may be
very hot.
IMPORTANT
Always switch
off and remove
the plug from
the electricity
supply before
cleaning this
appliance.
For electrical data
refer to the
rating label on
the front of the
dryer cabinet
(with the door
open).
17

Advertisement

Table of Contents
loading

Table of Contents