Controls And Indicators - Hoover Vision HD Instruction Book

40005197Eng.qxd 30/08/2007 13:16 Page 11

Controls and indicators

EMPTY WATER COUNTDOWN FILTER CARE
INDICATOR DISPLAY INDICATOR
PROGRAMME ACRYLICS/ START/ START ON/OFF
SELECTOR SYNTHETICS PAUSE DELAY BUTTON
BUTTON BUTTON BUTTON
Control panel and indicator lights
Programme Selector – Select the required programme
On/Off button and indicator – Press to switch on, the indicator will light
Start Delay button – Allows the user to delay the start of the drying cycle (see
details of operation page 16)
Start/Pause button – Press to commence the selected drying programme
Acrylics/Synthetics button – Press to reduce the heat level for delicate items, the
indicator above the button will light up. To change the heat setting the programme
must be reset
Low Heat – Indicator light ON High Heat – Indicator light OFF
Empty Water indicator – Lights when the water container is full
Filter Care indicator – Lights when the filter needs cleaning
Display
START – When the dryer is switched On the START indicator will flash, when the
programme starts the START indicator will light up
60' – Indicator lights when there is less than 60 minutes left until completion of the
programme
15' - Indicator lights when there is less than 15 minutes left until completion of the
programme. At this stage of the drying cycle the machine enters the Cool Down phase
STOP - Indicator lights when the programme is finished
6h - 6 hour start delay (light flashes when in operation)
9h - 9 hour start delay (light flashes when in operation)
11