Controls And Indicators - Hoover Vision HD VHC680F-80 Instruction Book

40006007.qxd 02/07/2009 16:36 Page 11

Controls and indicators

FILTER CARE
PROGRESS EMPTY WATER
INDICATOR
DISPLAY INDICATOR
START/PAUSE
DELICATES DELAY START
PROGRAMME
BUTTON
BUTTON BUTTON
SELECTOR
Control panel and indicator lights
Programme Selector – Select the required programme
Delay Start button – Allows the user to delay the start of the drying cycle (see
details of Operation on page 17)
Start/Pause button – Press Start/Pause to commence the selected drying
programme
Delicates button – Press to reduce the heat level for delicate items, the
indicator above the button will light up. To change the heat setting the
programme must be reset
Low Heat – Indicator light ON
High Heat – Indicator light OFF
Empty Water indicator – lights when the water container is full
Filter Care indicator – lights when the filter needs cleaning
Progress display
DRY – When the programme is selected the DRY indicator will flash, when the
programme starts the DRY indicator will light up.
– Indicator lights when there is a short time left until completion of the
programme. At this stage of the drying cycle the machine enters the Cool
Down phase.
The length of the Cool Down phase varies between 10 and 15 minutes
depending on the programme.
END – Indicator lights when the programme is finished.
11