Connecting The Xsusb Board To Your Xsa Or Xsb Board; Connecting A Pc To Your Xsusb Board - XESS XSUSB User Manual

Connecting the XSUSB Board to Your XSA or XSB Board

Just push the male DB25 connector on the XSUSB Board into the female DB25 connector
on your XSA or XSB Board as shown in Figure 1. The fit of the connectors will keep the
XSUSB Board in place, but you can also use the mounting screws to prevent the boards
from separating.
Don't worry if the metal shell on the XSUSB DB25 connector is loose. The shell will be
held in place when the XSUSB and XS Board are connected.
Note that the XSUSB Board works only with the XSA-50, XSA-100, XSA-200, XSA-
3S1000 and XSB-300E Boards.
XSV Boards!
XSA-3S1000 Board
̈

Connecting a PC to Your XSUSB Board

Attach the USBA plug of a USB 1.1 or USB 2.0 cable to a USB port on your PC. Then
attach the USBB plug on the other end of the cable to the USBB port of the XSUSB
Board.
XSUSB INTERFACE BOARD V1.0 USER MANUAL
It is not compatible with any of the XS40, XS95 or
USBB Port
Figure 1: Connection of the XSUSB Board to an XSA-3S1000 Board.
USB Cable
XSUSB Board
Mounting Screw
5