Table of Contents
Advertisement
2
Installation
Installing the XSTOOLS Utilities and Documentation
XESS Corp. provides the XSTOOLS utilities for interfacing a PC to your XS Board through
the parallel and USB ports. These utilities should be installed automatically when you
insert the XSTOOLs CDROM into your CDROM drive. If not, then manually run the
SETUP.EXE installation program on the CDROM.
Setting the Jumpers on Your XSUSB Board
There are four jumpers on the XSUSB Board and shunts should be set on them as shown
below. A shunt should be on jumper JP2. There should not be any shunts on jumpers
JP1, JP3 or JP4.
XSUSB INTERFACE BOARD V1.0 USER MANUAL
4
Advertisement
Table of Contents
