Base Station Power Supply - Matra Nortel MC 6500 Manual

3.3.9

BASE STATION POWER SUPPLY

Base stations are powered using a 40 V or 48 V supply voltage selected by jumpers on the
cards (OCZ, EOCU).
For DECT radio base stations, select (preferably) 48 V supply voltage. The 40 V power supply
voltage is mandatory for the S0 interfaces providing a remote power supply voltage.
A 40 V remote power supply mandatory for the EOCT card.
Note: Base stations can be used in 4-channel mode with software release 11.5 or later,
with the EOCU interface card and its ADPCM daughter cards.
LCAH-30521-001-05=01/EN
This confidential document is the property of MATRA NORTEL COMMUNICATIONS and may not be copied or circulated without permission.
Ce document confidentiel est la propriété de MATRA NORTEL COMMUNICATIONSet ne doit pas être reproduit ou communiqué sans autorisation.
PAGE 49/171