Table of Contents
Advertisement
3.3
MC 6501-C6
The following S0 interface cards are used to connect DECT radio base stations:
♦
OCZ2 card
♦
EOCT card
♦
EOCU card
Note:
The description and configuration of OCT and EOCU cards are the same as for
the MC 6501-C1 PBX. See the sections concerned.
3.3.1
OCZ2 CARD
♦
The switches below show the factory configuration.
PAGE
40/171
This confidential document is the property of MATRA NORTEL COMMUNICATIONS and may not be copied or circulated without permission.
Ce document confidentiel est la propriété de MATRA NORTEL COMMUNICATIONS et ne doit pas être reproduit ou communiqué sans autorisation.
Figure 7: OCZ2 card layout
LCAH-30521-001-05=01/EN
Advertisement
Table of Contents
Need help?
Do you have a question about the MC 6500 and is the answer not in the manual?