Start/Pause Button; Child Lock - Heinner HWM-VF2712SD++ Instruction Manual

www.heinner.com 7Kg, 220-240V~50Hz, 1 00rpm
START / PAUSE BUTTON
By pressing on the Start/Pause button, you may start the programme you have selected or
suspend a running programme. If you switch your machine to the standby mode, the
Start/Pause led on the electronic display will blink.

CHILD LOCK

To avoid programme flow from being affected if programme buttons are pressed or
programme button is turned when performing washing operation in your machine, child
lock is available.
Child lock will be activated in case pressed on both auxiliary functions 1 and 2 at the same
time for more than 3 seconds. You can see the auxiliary function leds on the display when
activated.
If pressed any button while child lock is active, the Additional Function Leds will blink on
the display.
If while the child lock is engaged and any programme is running, the programme knob is
switched to the CANCEL position and another programme is selected, the programme
previously selected continues from where it left.
To deactivate it, it will be sufficient to press on the same buttons for more than 3 seconds.
When the child lock is deactivated, the Additional Function Leds will blink on the display.
24