Connecting The Speakers - audium Comp 3.2 Drive User Manual

Connecting the speakers:

After placing the speakers in the desired location, connect them to your music source.
Depending on whether Active or Drive Speaker, this is done as follows:
Active Speaker:
Connect the speakers with high-quality RCA cables with the line-out of your preamp or the
audio output of your computer. Lead the left line out of the preamp to the left speaker and
the right line out to the right speaker.
Since the integrated sound card of computers / laptops often do not meet the sound level
of AUDIUM speakers it is recommended to use an external DAC which you connect to
your computer via USB or TosLink.
Connecting to a Preamp or a Streamer with volume control:
Connecting to a Computer:
If your computer has an optical digital output, it is advisable to connect it to an external
converter as the non-electrical, galvanically isolated connection prevents interference from
the computer to the loudspeakers.
- 8 -