Table of Contents
Advertisement
The programmable functions are used
to alter the machine's electronics to
suit changing requirements.
Programmable functions can be
altered at any time.
The programming is carried out in eight
steps (, , ... ) using the sensor
controls.
Accessing the programming level
Pre-requisites:
- The washing machine is switched on
(the programme selector is pointing
to a wash programme).
- The washing machine door is open.
Touch the Start/Add laundry sensor
and leave your finger on it whilst
carrying out steps -.
Close the washing machine door.
Wait until the Start/Add laundry sensor
lights up constantly ...
... and then take your finger off the
Start/Add laundry sensor.
After approx. four seconds, will light
up in the time display.
Programmable functions
Choosing and selecting a
programmable function
The number of the programmable
function will appear in the time display
as and a number: e.g. .
Touch the or sensor control to
scroll to the next or previous
programmable function:
Programmable functions
Keypad tone
PIN code
Control field switch-off behaviour
Memory
Additional long pre-wash – Cottons
Gentle action
Reduced temperature
Water plus
Water plus level
Maximum rinse level
Suds cooling
Anti-crease
Low water pressure
Display brightness dimmed
Confirm the selected programmable
function by touching the Start/Add
laundry sensor control.
71
Hide quick links:
Advertisement
Table of Contents
