Microsd Card; Camera Power Supply - Niceboy PILOT Q9 RADAR User Manual

MICROSD CARD

Choose a microSD card from an original manufacturer with
fast video recording (type UHS-I U3 or faster) with a maximum
capacity of 128GB. Before using the camera for the first time,
it is necessary to format the card on a PC with the FAT32 file
system (formatting the memory card will erase all data on the
card). Insert the memory card into the camera with the PINs
facing the camera display.
Recommendation: format the memory card regularly on a PC
to avoid video recording problems. If the camera is used on
daily basis, format the card at least once per month. For more
information on using a memory card and formatting it, contact
the manufacturer of the selected memory card.
SWITCHING THE CAMERA ON / OFF AUTOMATICALLY
As soon as the camera detects charging, it will automatically
switch on and start recording (an inserted memory card is
required). When the camera gets disconnected from the power
supply, it will stop recording and switches itself off.

CAMERA POWER SUPPLY

The camera can be connected to a power source by a car char-
ging adapter (included in the product package), or by an USB
cable connected to a PC or a charging adapter from a mobile
phone. You can also use a power bank. For the GPS function, it
is necessary to connect the camera to the power supply using
only the supplied original GPS cable.
Notice: the camera is not equipped with a battery, but a super-
capacitor, which is safer from the point of view of use in the
car (it is not damaged due to changes in temperature, it better
tolerates both frost and high temperatures). For this reason, the
camera can only be used when permanently connected to the
power supply.
28