Uninstalling The Software; Uninstalling The Isis/Twain Driver And Job Registration Tool - Canon IMAGE FORMULA DR-3010C User Manual

2. Uninstalling the Software

If the ISIS/TWAIN driver, Job Registration Tool, or CapturePerfect 3.0 are not
operating normally, follow the procedure below to uninstall them. Then,
reinstall the software from the DR-3010C setup disc. (See "2. Installing the
Software," on p.13.)
IMPORTANT
Log on to Windows as an Administrator.
From the Windows task bar, click [Start] → [Control Panel].
Double-click [Add or Remove Programs].
79
The [Add or Remove Programs] dialog box appears.

Uninstalling the ISIS/TWAIN Driver and Job Registration Tool

From the Programs list, click [Canon DR-3010C Driver] (or [DR-3010C Job
Tool]) → click [Remove].
NOTE
If you clicked [DR-3010C Job Tool], click [Change/Remove].
DR-3010C
DR-3010C