Register the job. For information on registering jobs, see Chapter 5, "Job
Registration Tool Settings," on p.56.
NOTE
•
You can register jobs from No. 1 to No. 9.
•
The following jobs are registered in the Registered Jobs by default:
No.1 Scan To Folder: Saves the scanned image to a specified folder in a
specified format.
No.2 Scan To Mailer: Saves the scanned image to a specified format and
attaches the file to an e-mail.
Click [Close] in the Job Registration Tool dialog box.
Place the document. (See "3. Placing Documents," on p.22.)
29
Press the Plus key or Minus key to select the job number of the Display
Panel( ) → press the Start key( ).
The Monitor for DR-3010C dialog box is displayed, and scanning starts.
When scanning is complete, the image data is sent with the specified
conditions.
Click [Close] in the Monitor for DR-3010C dialog box.
DR-3010C
DR-3010C