Tenda W311R User Manual page 50

11N Wireless Broadband Router User Guide
which ranges the External ports used to set the
server or Internet applications.
IP Address: Enter the IP address of the PC which
you want to set as the server.
Protocol: Select the protocol (TCP/UDP/Both) for
the application. If you are not clear about the
protocol you are using, you can select "Both".
Enable: Click the Enable checkbox to bring the set
rule into effect.
Delete: Clear all settings of this item.
Well-Known Service Port: The well-known
protocol
menu.Select one and select a sequence number in
the ID drop-down menu and then click "Add",this
port will be added automatically to the ID list. For
other well known service ports that are not listed,
you can manually add them to the list.
Add: Add the selected well-known port to the
policy ID.
For example:
The server at IP address of 192.168.0.10 provides port
80 for WEB service and port 23 for Telnet service. If you
want clients in the Internet to visit that server, you need
to set it as above.
NOTE:
If you set the service port of the virtual server as 80,
ports are listed
45
in the drop-down