Table of Contents
Advertisement
11N Wireless Broadband Router User Guide
Back panel port show
Back panel port description (from L to R）
POWER
The jack is for power adapter connection. Please
use the included standard power adapter.
WAN
One 100Mbps Ethernet port that can be connected
to Ethernet devices such as MODEM, Switch, Router,
etc.. Usually it is used to connect DSL MODEM or
Cable MODEM, or ISP network cable for connecting
to the Internet.
LAN (1, 2, 3, 4)
Four 100Mbps Ethernet ports that can be connected
to an Ethernet switch, Ethernet router, or NIC card.
Mostly they are used to connect to computers,
Ethernet switches, etc.
RESET
The system reset button. Press and hold this button
for 7 seconds and all of the settings will be deleted
and router settings will be restored to factory
default.
6
Advertisement
Table of Contents
