Page 5
Insert wooden dowel (A) to leg (13), secure cam bolt (B) and door stopper (E) with screw (G) to top panel (1). Insert wooden dowel (A) to side panel (3,4,5,6).
Page 6
Use wrench (S) to secure leg (14) to bottom panel (2) with bolt (D). Use wrench (S) to secure bottom panel (2) to side panel (3,4,5,6) with bolt (D).
Page 7
Insert leg (13) into bottom panel (2). Slide back panel (7,8) into grooves as per diagram.
Page 8
Insert top panel (1) into side panel (3,4,5,6), then insert and secure cam lock (C) to side panel (3,4,5,6) to lock it. Secure plastic wedge (P) to back panel (7,8) with screw (Q).
Page 9
Place sticker (R) over holes as per diagram. Insert shelf support pin (N) into side panel (3,4,5,6).
Page 10
Place shelf (9,10) on top of support pin (N). Secure bolt (F) to door (11, 12), door hinge (I) to door (12) and door hinge (J) to door (11) with screw (H).
Page 11
Secure handle (K) to door (11,12) with screw (L). Place plastic pivot (M) over holes as per diagram.
Page 12
Insert door hinge (I, H) into panel hole as per diagram. Slide door (11, 12) onto door hinge (I, J) as shown in diagram and secure it with screw (H).