Page 1
Item # : W58CS2D Assembly Instructions Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved.
A Phillips head screwdriver is required for the assembly of this product . Power tools should not be used to assemble this product. Drill may be needed for securing product to wall. Copyright 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
5/32"x25mm Glue tube Philips head screwdriver required for assembly (not included) The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included. Copyright 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
Page 5
Step 1 Insert wooden dowel (A) into part (2), secure cam bolt (B) with screwdriver into part (1). Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved.
Page 6
Step 2 Insert wooden dowel (A) into part(6,7,8,9), and secure cam bolt (B) with screwdriver into part (6,7,8,9) Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved.
Page 7
Step 3 Insert wooden dowel (A) into parts(3,4,5) Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved.
Page 8
Step 4 Secure cam bolt (C) into parts (3)two sides Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved.
Page 9
Step 5 Rotate part (16) to part(2) clockwise Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved.
Page 10
Step 6 Attach part (2) to parts (8,9) using cam lock (C) Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.10...
Page 11
Step 7 Secure Cam lock (C) into part (2) and attach to parts(6,7) Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.11...
Page 12
Step 8 Attach parts(4,5) to part(2) by using bolt (E), Hex Key (F) to secure Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.12...
Page 13
Step 9 Insert part (12,13) to part (2) Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.13...
Page 14
Step 10 Insert part (1) into part (3,4,5) then insert and secure cam lock (C) to part (3,4,5) to lock it. Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.14...
Page 15
Step 11 Secure plastic wedge (K) to back panel (12,13) using screw (J) with screwdriver. Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.15...
Page 16
Step 12 Place sticker (D) over holes as per diagram. Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.16...
Page 17
Step 13 Insert shelf support pin (G) into part (6,4,5,8,7,9), Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.17...
Page 18
Step 14 Place shelf (9,10) on top of support pin (G). Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.18...
Page 19
Step 15 Slide door (14) onto door hinge (M) as shown in diagram and secure it with screw (L). Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.19...
Page 20
Step 16 Slide door (15) onto door hinge (M) as shown in diagram and secure it with screw (L). Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.20...
Page 21
Step 17 Attach handle (N) to part (14,15) using handle bolt (P) with screwdriver. Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.21...
Page 22
Step 18 Attach Screw (L) to the door hinge (M) to secure the door(14) Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.22...
Page 23
Step 19 Attach Screw (L) to the door hinge (M) to secure the door(15) Copyright 2018 by Walker Edison Furniture Co., LLC. All rights reserved. P.23...
Page 24
Step 20 Final Assembly P.24 Copyright 2018, by Walker Edison Furniture Co., LLC. All rights reserved.