Advertisement
7. Connecting via SSH
To connect via SSH protocol in UNIX-based systems, it will be sufficient to indicate from within
the terminal's emulator the command: ssh ip_address.
In the MS Windows environment, you can use the PUTTY program. You will need to configure
settings in the Sessions section of this program. If you have any question about SSH clients, e.g.
PUTTY, please consult the relevant documentation.
RPCM's system during access via SSH uses username and password authentication.
Default user name and password:
user name — rpcmadmin
password — rpcmpassword
Example our device's IP is 192.168.xx.yy:
ssh 192.168.xx.yy
In response, username and password will be requested:
login as: rpcmadmin
rpcmadmin@10.210.1.24's password:
Alternatively, you can create a username right away:
ssh rpcmadmin@192.168.xx.yy
In this case, the system will request that you enter only the password:
rpcmadmin@192.168.xx.yy password:
Fig. 8. An example of the console screen when logging in via SSH.
6
Advertisement
