Advertisement
6. Connecting via SSH
To connect via SSH protocol in UNIX-based systems, it will be sufficient to indicate from within
the terminal's emulator the command: ssh ip_address.
In the MS Windows environment, you can use the PUTTY program. You will need to configure
settings in the Sessions section of this program. If you have any question about SSH clients, e.g.
PUTTY, please consult the relevant documentation.
RPCM's system during access via SSH uses username and password authentication.
Default user name and password:
user name — rpcmadmin
password — rpcmpassword
Example our device's IP is 192.168.xx.yy:
ssh 192.168.xx.yy
In response, username and password will be requested:
login as: rpcmadmin
rpcmadmin@10.210.1.24's password:
Alternatively, you can create a username right away:
ssh rpcmadmin@192.168.xx.yy
In this case, the system will request that you enter only the password:
rpcmadmin@192.168.xx.yy password:
RPCMCli version 0.7.7 is starting
user rpcmadmin successfully authenticated from 192.168.xx.yy, access level
superuser
Auto-logout time is set to 3600 seconds
[Serial Name]: SuperGeroy
[Serial Number]: RU2017101100000002MO01DN01
[Firmware Version]: 0.9.454
[Software Version]: 0.7.7
[Uptime]: 02:20:32
[Force Failback]:
-------------------------------------------------------------------------------
[Input 1]: 233V @ 49.99Hz
[Input 2]: 232V @ 49.99Hz
-------------------------------------------------------------------------------
[Output 0]:
[Output 1]:
[Output 2]:
[Output 3]:
[Output 4]:
[Output 5]:
[Output 6]:
[Output 7]:
[Output 8]:
[Output 9]:
Type 'help' to get suggestions
SuperGeroy [192.168.xx.yy] 0 rpcmadmin >
Fig. 10. An example of the console screen when logging in via SSH for the RPCM 1502 or
RPCM 1532 models (RPCM ME 1563 has one input)
OFF
[Failback Delay in Seconds]:
OFF <admin:
ON>
ON <admin:
ON>
ON <admin:
ON>
ON <admin:
ON>
ON <admin:
ON>
ON <admin:
ON>
ON <admin:
ON>
ON <admin:
ON>
ON <admin:
ON>
OFF <admin: OFF>
[Temperature]: 28C
[Ground]:
[Release Date]: 20180515164154
[Software Release Date]: 20180515185713
[Model/Hardware Version]:
2.338A
0.493KW (ACTIVE, PRIORITY)
0.000A
0.000KW
0mA
0W
251mA
52W
223mA
46W
530mA
112W
586mA
125W
223mA
46W
525mA
112W
0mA
0W
0mA
0W
0mA
0W
GOOD
1502/RPCM
0
(OVERLOAD)
(OVERLOAD)
6
Advertisement
