ZOLL Propaq MD Quick Reference Manual page 6

All manuals and user guides at all-guides.com
Quick Reference Guide
SpO Monitoring
2
1. Connect the appropriate sensor cable to
the Propaq MD unit.
2. Apply probe to patient.
The pleth waveform and oxygen saturation
value will automatically appear on the
screen when a signal has been detected.
Changing the Waveform Gain
1. Press & to highlight
the Gain Label above the pleth
waveform. Press
2. Press & to highlight
the desired waveform size.
Press .
Removing the Pleth Waveform
1. Press & to highlight the
Source Label above the pleth
waveform. Press
2. Press to highlight Remove.
Press .
Note: You can add the pleth waveform back to the display by
selecting Insert from the Source Label menu or by reconnecting the
sensor to the Propaq MD unit and the patient.
.
.
SpO Probe Connection
2