Manual Inching Function - Volvo L20B Owner's Manual

Attachments - optional equipment
106

Manual inching function

Manual inching function
The manual inching function offers the possibility to adapt the
travel speed of the wheel loader to the application, independently
from the position of the drive pedal.
Operation
Turn the rotating inching valve (arrow) to the left hand end stop
(open = no drive).
Adjust the engine speed with the drive pedal or the hand throttle to
the required speed.
Operate the travel switch to the desired travel direction forward/
reverse.
M200086A
Turn the rotary inching valve (arrow) in clockwise direction (close),
until the desired travel speed is reached.
Note:
During normal operation of the machine the rotary inching
valve must be completely closed!
Adjustment of manual throttle
The hand throttle cable (arrow) is located on the left hand side
beside the driver's seat.
Operation
Kick the drive pedal slightly down, pull out the hand throttle cable
(arrow) until the desired engine speed is reached, then lock by
turning clockwise.
To shut down the engine kick the drive pedal slightly down, unlock
the hand throttle cable (arrow) push the it in completely.
M200087A
ATTENTION!
The machine can be stopped with the inching brake pedal,
independently from the setting of the rotary inching valve.