Mixer; Eye Protection; Machinery - Strong Floor-Mate 80E Owner's Manual

E. Mixer
Caution: ALWAYS WEAR SAFETY GOGGLES WHEN OPERATING OR
WORKING AROUND THE MIXER. NEVER WEAR LOOSE CLOTHING OR HAVE
LOOSE ARTICLES AROUND THE MIXER. ALWAYS TEST THE SAFETY KILL
SWITCH BEFORE MIXING BEGINS. KEEP HANDS AND CLOTHING CLEAR OF
MIXER AREA. Mixer paddles can catch hands of clothing as they turn, causing severe
bodily injury by being pinned between the mixer blade and mixer walls. A loose article
of clothing, if caught in the mixer blades, can pull an operator into the mixer.
1. It is very important to keep the mixer inlet grate in place during operation and clean-
up.
2. The safety kill switch stops the engine if the mixer inlet grate is removed. This
switch is crucial to the safe operation of the machine. Never under any
circumstances remove, dismantle, or hinder the use of this switch in any way.
WARNING: OPERATION OF THIS EQUIPMENT WITHOUT GUARDS IN
PLACE MAY LEAD TO SEVERE BODILY INJURIES SUCH AS CUTS,
BRUISES, BROKEN LIMBS OR EVEN DEATH.
F. Eye Protection
Always wear safety glasses, goggles or a face shield when operating machine as dust and
sand particles become airborne and could get into the eyes causing severe irritation or
even permanent loss of sight.
G. Machinery
1. Read all warning and caution signs before starting machine.
2. Do not remove any guards or grates while machine is running. Stop machine, engage
the red E-stop, and disconnect power cable (or use Lock-out Tag-out) before
removing a guard, or doing any work on machine.
9