Guards - Strong Floor-Mate 80E Owner's Manual

6. Use only the correct voltage that your particular machine is equipped for. Standard machine
is 230 volts, Single Phase AC.
7. A charged fire extinguisher designed for use on electrical fires should be kept near the
machine at all times. (Class BC, Dry Chemical)
8. Throw electrical disconnect and lockout before final wash-down of exterior or main electrical
cabinet.
9. Always keep main electrical cabinet closed and tightly sealed. The cabinet is NEMA 4 but
should never be cleaned with a pressure washer.
Caution: FAILURE TO OBSERVE THE ABOVE WARNINGS CAN RESULT IN
SEVERE BODILY INJURY, INCLUDING EYE INJURY AND BURNS WITH
LOSS OF SIGHT OR LIBS, CUTS, BRUISES OR POSSIBLE DEATH. EYE
PROTECTORS SHOULD BE WORN AT ALL TIMES WHEN OPERATING OR
WORKING ON THIS EQUIPMENT.
D. Guards
BE SURE ALL MACHINERY GUARDS ARE IN PLACE BEFORE OPERATING
THE FLOOR-MATE 80E. THE GUARDS PROVIDED WITH THIS MACHINE
CONSIST OF THE FOLLOWING:
• MIXER INLET GRATE
• WET MATERIALS HOPPER GRATE/SCREEN
• MIXER CHAIN GUARD
• MIXER OUTLET SPLASH GUARD
• MATERIAL PUMP DRIVE CHAIN GUARD
• ELECTRICAL PANEL DUST HOODS
Never operate the machine without ALL these guards in place. The machine should be
kept as clean as possible. Material should not be allowed to build up on warning signs,
instructions, gauges, etc. It is also possible that material buildup could interfere with
operation of the machine, thus presenting hazards of a general nature.
Danger: KEEP HANDS AND LIMBS CLEAR OF MOVING COMPOENNTS
AS THEY MAY BECOME TRAPPED OR CAUGHT CAUSING SEVERE
INJURIES SUCH AS CUTS, BRUISES, BROKEN LIMBS OR EVEN DEATH.
8