Preface - Strong Floor-Mate 80E Owner's Manual

Preface

The Floor-Mate 80E machine by Strong Manufacturing Company, Inc. is specifically designed to
convey, mix, and pump cementitious slurries.
We are confident that your Floor-Mate 80E will increase the efficiency of your work force.
However, the service and life of the machine will depend greatly on the care and attention you
give it during daily and routine use. This OPERATION & MAINTENANCE MANUAL has
been provided to assist you in obtaining the utmost performance from your machine and to
instruct you and your operating personnel in its SAFE and efficient use. This manual should be
carefully read and its instructions followed by those who will be responsible for the operation,
maintenance, transportation, and uses of the machine. You should remember that the nature of
the business – that is, the mixing and pumping of gypsum or cement and sand aggregates, water
and admixtures – creates the most severe conditions under which machinery can operate. It was
with these conditions in mind that the components for the Floor-Mate 80E were selected and
designed.
A section immediately following contains specific SAFETY INFORMATION. No one should
be permitted to perform any function on the machine unless he or she has read and understands
the safety section of this manual. The safety section is also available free of charge to owners of
the Floor-Mate 80E machine as a separate pamphlet by writing the Strong Manufacturing
Company, PO Box 8068, Pine Bluff, Arkansas, 71611. Or calling 870-535-4753.
Include the serial number(s) of your machine(s) with your request. Additional copies of the
entire Operation and Maintenance Manual can be obtained at the above address for a minimal
fee.
4