Advertisement
The actual interfaces may be somewhat different from the above ones. Anyway the
user should wait until the installation finishes. Please don't run any other programs
during the installation
2.1.5 Running the application software for the programmer
The application software for the programmer has a standard Windows UI, including
pull down menus and buttons, etc. The user should have some knowledge about the
MS Windows OS and be able to use the computer mouse well.
After the application software for the programmer is started, it will communicate with
the programmer immediately and start the initialization. If the communication fails,
please check according to the following steps:
One programmer module. Check the connection between the programmer
hardware and the computer, and turn on the power switch.
Follow the correct installation steps. If the programmer hardware is connected
to the computer before the programmer application software is installed, the
computer will detect the new hardware and the following window will appear.
Please click the "Cancel" button lest the OS should install the driver with a
compatible ID and cause some problems.
1296 Kifer Rd. Suite #605
Sunnyvale, CA 94086
www.xeltek.com
sales@xeltek.com
Tel: +1 408-530-8080
Fax: +1 408530-0096
®
SuperPro
6100 Programmer
14 / 64
Advertisement
