Advertisement
®
SuperPro
6100 Programmer
"muti_p.exe" can manage four modules （4 SP6100s or 1 SP6104） integratively. The main screen
is a management interface that controls the hardware of the programmer by sending commands to
the SP6100 software. After the main interface, the process of communicating with the SP6100
software starts automatically.
If the system does not find the programmer or something is wrong with a module, select
Disconnect to cancel the connection. Then check the connection between the hardware and
computer. Select Connect to reconnect.
"muti_p.exe" has administrator mode and producer mode. In administrator mode, users can set
projects and save them, then entering producer mode, users can load these project. In producer
mode, users can load different project for different module or load the same project for all the
modules. It's very convenient and flexible.
NOTE: the hub used to connect SP6100s should be specified by XELTEK.
www.xeltek.com
20 / 64
1296 Kifer Rd. Suite #605
sales@xeltek.com
Sunnyvale, CA 94086
Tel: +1 408-530-8080
Fax: +1 408530-0096
Advertisement
