Dryer Features; Drum Lamp; Drying Rack - GE Profile Harmony DPGT750ECPL Owner's Manual And Installation Instructions

Changing the

Drum Lamp

Using the

Drying Rack

Before replacing the drum lamp, be sure to unplug
the dryer power cord or disconnect the dryer at the
household distribution panel by removing the fuse
or switching off the circuit breaker.
The drum lamp is located at the top left of the door
frame.
1 Remove the screw holding the drum lamp shield
in place.
2 Slide the shield up and remove.
3 Remove the bult and replace with a 15-watt,
120-volt candelabra-base bulb.
4 Replace the lamp shield and screw.
A handy drying rack may be used for drying delicate
items such as washable sweaters.
Hook the rack over the lint filter so the rack extends
into the dryer drum.
NOTE:
• The drying rack should only be used with the
TIMED DRY or RACK DRY cycles. It is also
strongly recommended when drying sneakers.
• Do not use this drying rack when there are other
clothes in the dryer.

Dryer Features

GEAppliances.com
Screw
15