Guarding Vision Setup; Add Camera To Guarding Vision - Velleman ECAMIP501 Quick Start Manual

ECAMIP501/ECAMIP501B·Quick Start Guide
Note:
The verification code is required when you add the camera to
Guarding Vision app.
7. Save the settings.

5.2 Guarding Vision Setup

Steps:
1. Download and install the Guarding Vision app by searching
"Guarding Vision" in App Store or Google Play
2. Launch the app and register for a Guarding Vision user account.
3. Log in Guarding Vision app after registration.

5.3 Add Camera to Guarding Vision

Before you start:
You need to enable the Guarding Vision service on camera before
adding it to your Guarding Vision account. Refer to Chapter 5.1.
Steps:
1. Use a network cable to connect the camera with a router if the
camera does not support Wi-Fi.
Figure 5-3 Connect a Router
TM
.