Panasonic CZ-RTC6BLW Operating Instructions Manual page 90

Troubleshooting
Cannot stop the
operation.
Or the unit starts to
run automatically
even if
is pressed.
The remote controller
screen displays
"
(alternately)
The remote
controller screen
does not display the
.
The remote controller
screen displays
"
(alternately)
90
(EN)
(Off) button
" " ".
" " ".
z Check if the outing function is activated or not.
( )
z Check control by central control device.
z Faulty sensor or incorrect installation.
→Turn OFF the ECONAVI function with the remote
controller (P.15) and contact the retailer
or point of purchase with the Model No. and
problem.
z The indoor unit has stopped. Turn on the
indoor unit.
z The unit is in Fan mode (
function does not operate in Fan mode.
z The ECONAVI function is set to OFF. Turn
the ECONAVI function ON with the remote
controller. (P.15)
z The indoor unit may not support the
ECONAVI function. If you turn the ECONAVI
function ON with the remote controller but
there is no change, the indoor unit does not
support the ECONAVI function.
Please contact the dealer.
z nanoe™ X is considered abnormal.
→Turn OFF the nanoe™ X function with the remote
controller (P.17) and contact the retailer
or point of purchase with the Model No. and
problem.
. The ECONAVI
)