Troubleshooting - Zanussi ZDLN2621 User Manual

1. Release the stoppers on the sides of the
sliding rails of the cutlery drawer and pull the
drawer out.
2
2. Move the upper basket to the lowest level to
reach the spray arm more easily.

TROUBLESHOOTING

WARNING! Improper repair of the
appliance may pose a danger to the
safety of the user. Any repairs must be
performed by qualified personnel.
The majority of problems that may occur can
be solved without the need to contact an
Authorised Service Centre.
Problem and alarm code
You cannot activate the appli-
ance.
18
C
B
A
1
• Make sure that the mains plug is connected to the mains sock-
et.
• Make sure that there is no damaged fuse in the fuse box.
3. To detach the spray arm (C) from the delivery
tube (A), turn the mounting element (B)
counterclockwise and pull the spray arm
downwards.
4. Wash the spray arm under running water. Use
a thin pointed tool, e.g. a toothpick, to remove
particles of soil from the holes. Run the water
through the holes to wash soil particles away
from the inside.
5. To install the spray arm (C) back, insert the
mounting element (B) in the spray arm and fix it
in the delivery tube (A) by turning it clockwise.
Make sure that the mounting element locks into
place.
6. Install the cutlery drawer on the sliding rails and
block the stoppers.
Refer to the below table for information on possible
problems.
With some problems, the lights related to the
programme buttons flash intermittently to indicate a
malfunction and the alarm code.
Possible cause and solution