Page 1
M306 Poly Blue Octave The MXR Poly Blue Octave brings modern and classic pitch shifting styles together with fuzz and modulation to create the ultimate octave pedal for tonecrafters and sonic seekers. jimdunlop.com/m306...
FUZZ switch toggles fuzz effect on/off 10 OCT+2 knob adjusts output level of signal shifted (blue LED indicates on) two octaves up 6 SUB-1 knob adjusts output level of signal shifted one octave down M306 | Poly Blue Octave 2...
MOD knob fully counterclockwise. The sound of the modulation is The MXR Poly Blue Octave is powered by one 9-volt battery dependent on the pitch-shifting setting as determined by ® (remove bottom plate to install), a 9-volt AC adapter such as...
To adjust the volume level of the fuzz effect, press and hold the FUZZ switch until the blue LED flashes. Use the An off-board tap switch such as the M199 MXR Tap DRY knob to set your desired fuzz volume, and then push Tempo Switch can be used to control the FUZZ switch the FUZZ switch again to save the setting.
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Unauthorized changes or modifications to this product could void the user’s authority to operate the equipment. M306 | Poly Blue Octave 5...
Software Product are the valuable trade secrets and confidential information of Dunlop and its suppliers. You shall not remove any product identification, copyright notices or proprietary restrictions from the Software Product or Dunlop product. M306 | Poly Blue Octave 6...
Page 7
Agreement,the prevailing the Software Product and/or the Dunlop product shall be, at party will be entitled to recover costs and reasonable attorneys’ fees. All notices under this Agreement will be in writing. M306 | Poly Blue Octave 7...
Need help?
Do you have a question about the Poly Blue Octave and is the answer not in the manual?
Questions and answers