Subscribe to Our Youtube Channel
Related Manuals for B&R PC 1200
Summary of Contents for B&R PC 1200
- Page 1 Panel PC 1200 pan- el mount device User's manual Version: 1.08 (November 2021) Order no.: MAPPC1200-ENG Translation of the original documentation...
- Page 2 Publishing information B&R Industrial Automation GmbH B&R Strasse 1 5142 Eggelsberg Austria Telephone: +43 7748 6586-0 Fax: +43 7748 6586-26 office@br-automation.com Disclaimer All information in this manual is current as of its creation. The contents of this manual are subject to change without notice.
-
Page 3: Table Of Contents
4.4.4.3 Calculation example C (worst-case application)................35 4.4.4.4 Calculation example D (worst-case application)................35 4.4.4.5 Information about the use cases....................... 36 4.4.5 Vibration and shock..........................37 4.5 Electrical properties............................38 4.5.1 Block diagram............................38 4.6 Device interfaces and slots...........................39 Panel PC 1200 panel mount device User's manual V1.08... - Page 4 7.1.5 Device manager............................62 7.1.6 Setup utility.............................. 63 7.1.6.1 Main..............................64 7.1.6.2 Advanced............................65 7.1.6.3 Security...............................74 7.1.6.4 Power..............................75 7.1.6.5 Boot..............................77 7.1.6.6 Exit..............................80 7.2 Upgrade information............................81 7.2.1 UEFI BIOS upgrade..........................81 7.2.1.1 BIOS upgrade............................ 81 Panel PC 1200 panel mount device User's manual V1.08...
- Page 5 9.1 0TB6102 2-pin power supply connector..................... 100 9.1.1 Order data............................. 100 9.1.2 Technical data............................100 9.2 Replacement parts............................101 9.2.1 5ACCRHMI.0018-000 - Technical data....................101 10 International and national certifications............102 10.1 Directives and declarations........................102 Panel PC 1200 panel mount device User's manual V1.08...
- Page 6 10.2.3 KC................................ 103 10.2.4 RCM..............................103 11 Environmentally friendly disposal..............104 11.1 Separation of materials..........................104 A.1 MTCX................................105 A.2 Viewing angles............................106 A.3 Projected capacitive touch (PCT).......................107 A.4 Surface resistance of the touchscreen (PCT).................... 107 Panel PC 1200 panel mount device User's manual V1.08...
-
Page 7: Introduction
Useful information, application tips and instructions for avoiding malfunctions. 1.2.2 Guidelines European dimension standards apply to all dimension diagrams. All dimensions in millimeters. Unless otherwise specified, the following general tolerances apply: Panel PC 1200 panel mount device User's manual V1.08... - Page 8 Up to 6 mm ±0.1 mm Over 6 to 30 mm ±0.2 mm Over 30 to 120 mm ±0.3 mm Over 120 to 400 mm ±0.5 mm Over 400 to 1000 mm ±0.8 mm Panel PC 1200 panel mount device User's manual V1.08...
-
Page 9: General Safety Guidelines
• Always place assemblies on suitable surfaces (ESD packaging, conductive foam, etc.). Metallic surfaces are not suitable surfaces! • Assemblies must not be subjected to electrostatic discharges (e.g. due to charged plastics). Panel PC 1200 panel mount device User's manual V1.08... -
Page 10: Regulations And Measures
Before switching on, live parts must be securely covered. All covers must be kept closed during operation. Panel PC 1200 panel mount device User's manual V1.08... -
Page 11: Ambient Conditions - Dust, Moisture, Aggressive Gases
The term "control systems" refers to all types of B&R products such as controllers (e.g. X20), HMI systems (e.g. Power Panel T30), process control systems (e.g. APROL) and supporting systems such as engineering workstations with Automation Studio. Panel PC 1200 panel mount device User's manual V1.08... -
Page 12: System Overview
3.1 General information With the Panel PC 1200, B&R offers an all-in-one PC family as part of the product portfolio. Its compact design allows installation in almost any control cabinet. By using removable mass storage devices that can be expanded up to 256 GB, the Panel PC 1200 is ideal for installing Windows or Linux operating systems. -
Page 13: Order Data
Figure Display variants 5PPC1200.0702-10A Panel PC 1200, 7", glass front. CPU and memory: Intel Atom E3940 1.6 GHz, quad core, 4 GB LPDDR4 RAM. Display and touch screen: 7", 800 x 480 pixels (WVGA) widescreen, mul- ti-touch (projected capacitive), control cabinet installation, land- scape format, anti-glare. -
Page 14: Overview
Display variants 5PPC1200.0702-10A Panel PC 1200, 7", glass front. CPU and memory: Intel Atom E3940 1.6 GHz, quad core, 4 GB LPDDR4 RAM. Display and touch screen: 7", 800 x 480 pixels (WVGA) widescreen, multi-touch (projected capacitive), control cabinet installation, landscape format, anti-glare. Interfaces: 2x Ethernet 10/100/1000 Mbit/s, 2x USB 3.0. -
Page 15: Technical Data
WVGA, 800 x 480 px Contrast Typ. 800:1 Viewing angles Horizontal Direction L / Direction R = Typ. 89°, min. 80° Vertical Direction U / Direction D = Typ. 89°, min. 80° Panel PC 1200 panel mount device User's manual V1.08... - Page 16 The temperature specifications correspond to a specification at 500 meters above sea level. The max. ambient temperature is typically derated 1 °C per 1000 meters starting at 500 m above sea level. Panel PC 1200 panel mount device User's manual V1.08...
-
Page 17: Technical Data - 10.1" Variants
Backlight Type Brightness (dimmable) Typ. 25 to 500 cd/m² Half-brightness time 50,000 h Filter glass Transmittance ≥85% Anti-glare coating Optical/Gloss = 70 Touch screen Type Multi-touch Technology PCT (projected capacitive touch) Panel PC 1200 panel mount device User's manual V1.08... - Page 18 The temperature specifications correspond to a specification at 500 meters above sea level. The max. ambient temperature is typically derated 1 °C per 1000 meters starting at 500 m above sea level. Panel PC 1200 panel mount device User's manual V1.08...
-
Page 19: Technical Data - 12.1" Variants
Backlight Type Brightness (dimmable) Typ. 40 to 400 cd/m² Half-brightness time 50,000 h Filter glass Transmittance ≥85% Anti-glare coating Optical/Gloss = 70 Touch screen Type Multi-touch Technology PCT (projected capacitive touch) Panel PC 1200 panel mount device User's manual V1.08... - Page 20 The temperature specifications correspond to a specification at 500 meters above sea level. The max. ambient temperature is typically derated 1°C per 1000 meters starting at 500 m above sea level. Panel PC 1200 panel mount device User's manual V1.08...
-
Page 21: Technical Data - 15.6" Variants
Backlight Type Brightness (dimmable) Typ. 40 to 400 cd/m² Half-brightness time 70,000 h Filter glass Transmittance ≥85% Anti-glare coating Optical/Gloss = 70 Touch screen Type Multi-touch Technology PCT (projected capacitive touch) Panel PC 1200 panel mount device User's manual V1.08... - Page 22 The temperature specifications correspond to a specification at 500 meters above sea level. The max. ambient temperature is typically derated 1°C per 1000 meters starting at 500 m above sea level. Panel PC 1200 panel mount device User's manual V1.08...
-
Page 23: Product Information
The device number can be retrieved from the B&R website (www.br-automation.com) using the serial number of the device (login required). Information (serial number, material number, revision, delivery date and end of warranty) about all components installed in the system can be retrieved using the device number. Panel PC 1200 panel mount device User's manual V1.08... -
Page 24: Mechanical Properties
The following diagrams are symbolic and only meant to illustrate how the dimension tables should be read. 2D and 3D diagrams (DXF and STEP formats) can be downloaded from the B&R website (www.br-automation.com). 4.3.1.1 7.0" variants 208.4 166.4 35.5 Panel PC 1200 panel mount device User's manual V1.08... -
Page 25: Variants
Technical data 4.3.1.2 10.1" variants 35.5 Panel PC 1200 panel mount device User's manual V1.08... -
Page 26: Variants
Technical data 4.3.1.3 12.1" variants 323.6 37.5 Panel PC 1200 panel mount device User's manual V1.08... -
Page 27: Variants
Technical data 4.3.1.4 15.6" variants 37.5 Panel PC 1200 panel mount device User's manual V1.08... -
Page 28: Spacing For Air Circulation
If the specified spacing for air circulation cannot be maintained, the maximum specified temperatures of the temperature sensors (see "Temperature sensor positions" on page 32) must be monitored in the application and appropriate measures taken if these values are exceeded. Panel PC 1200 panel mount device User's manual V1.08... -
Page 29: Mounting Orientations
No limitation Up to ±90 No limitation Up to 180 No limitation Vertical Inclination [°] 5CFAST.032G-10 5CFAST.064G-10 5CFAST.128G-10 5CFAST.256G-10 No limitation Up to ±45 From -46 to -90 Max. operating temperature: 60°C Panel PC 1200 panel mount device User's manual V1.08... - Page 30 Inclination [°] 5CFAST.032G-10 5CFAST.064G-10 5CFAST.128G-10 5CFAST.256G-10 No limitation Up to ±45 No limitation From -46 to -90 No limitation Max. operating temperature: 60°C starting with Rev. B2 (up to Rev. B1: 55°C) Panel PC 1200 panel mount device User's manual V1.08...
- Page 31 Up to 180 No limitation Vertical Inclination [°] 5PPC1200.0702-xxx 5PPC1200.101E-xxx 5PPC1200.121E-xxx 5PPC1200.156B-xxx No limitation Up to ±45 No limitation From -46 to -90 No limitation Max. operating temperature: 60°C Max. operating temperature: 55°C Panel PC 1200 panel mount device User's manual V1.08...
-
Page 32: Environmental Properties
Temperature of the CFast area 5PPC1200.0702-xxx: 5PPC1200.101E-xxx: 5PPC1200.121E-xxx: 5PPC1200.156B-xxx: The measured temperature is a guide value for the immediate ambient temperature, but it may have been influenced by neighboring components. Self-Monitoring, Analysis and Reporting Technology Panel PC 1200 panel mount device User's manual V1.08... -
Page 33: Temperature/Humidity Diagrams
RH [%] Relative humidity (RH) in percent and non-condensing 10.1" variants RH [%] T [°C] Diagram legend Operation T [°C] Temperature in °C RH [%] Relative humidity (RH) in percent and non-condensing Storage and transport Panel PC 1200 panel mount device User's manual V1.08... - Page 34 RH [%] Relative humidity (RH) in percent and non-condensing 15.6" variants RH [%] T [°C] Diagram legend Operation T [°C] Temperature in °C RH [%] Relative humidity (RH) in percent and non-condensing Storage and transport Panel PC 1200 panel mount device User's manual V1.08...
-
Page 35: Derating The Ambient Temperature
No limitation Operation with 100% display brightness Derating -10°C Wall thickness 5 mm Derating -5°C Max. ambient temperature in the application example (worst case) 45°C See ambient conditions in the technical data. Panel PC 1200 panel mount device User's manual V1.08... -
Page 36: Information About The Use Cases
• BurnInTest Pro V8.1 from PassMark Software for simulating 100% memory utilization: ° Mass storage (CFast card). • Maximum power consumption of the 2 USB interfaces. • 2x 1 Mbit Ethernet. • 100% display brightness. Panel PC 1200 panel mount device User's manual V1.08... -
Page 37: Vibration And Shock
Testing is performed per EN 60068-2-27. The specification refers to a device in its original packaging. The specifications for vibration and shock during operation apply equally to installation with retaining clips and using a VESA bracket. Panel PC 1200 panel mount device User's manual V1.08... -
Page 38: Electrical Properties
USB 3.0 Watchdog host eDP2VLDS bridge Power-up sequencing Display connector 24 VDC Power input supply Magnetics Magnetics Legend 2.0_Px USB 2.0 port x Internal interface 3.0_Px USB 3.0 port x External interface Panel PC 1200 panel mount device User's manual V1.08... -
Page 39: Device Interfaces And Slots
Nominal voltage 24 VDC ±25%, SELV/PELV Overvoltage category per EN 61131-2 Inrush current Typ. 5 A, max. 100 A for < 50 μs Galvanic isolation IEC 61010-2-201 requirements must be observed. Panel PC 1200 panel mount device User's manual V1.08... -
Page 40: Grounding
Downloads section of the B&R website (www.br-automation.com) (if required and not already included in the operating system). Information: Necessary drivers must be downloaded from the B&R website, not from manufacturer websites. Panel PC 1200 panel mount device User's manual V1.08... -
Page 41: Usb Interfaces
Each USB interface is protected by a maintenance-free USB current-limiting switch (max. 1 A). 4.6.1.5 CFast slot The Panel PC 1200 offers an easy-to-access CFast slot so that a CFast card can also be used as a removable storage medium for transferring data or performing upgrades. -
Page 42: Power And Reset Buttons
Faulty or incomplete BIOS, MTCX or I/O FPGA update, battery state BAD, power saving mode (standby) Information: An update must be performed again. Disk Yellow Indicates access to the CFast card LED2 No function LED1 No function S5: Soft-off S4: Hibernate (suspend-to-disk) Panel PC 1200 panel mount device User's manual V1.08... -
Page 43: Battery
TPM firmware update. Access to the encrypted drive is lost. Passwords must be carefully stored and protected from unauthorized access. At 50°C, 8.5 μA for the components being supplied and self-discharge of 40%). Panel PC 1200 panel mount device User's manual V1.08... -
Page 44: Individual Components
Technical data 4.7 Individual components 4.7.1 CFast cards For detailed information about compatible CFast cards, see the aggregate data sheet for CFast cards on the B&R website. Panel PC 1200 panel mount device User's manual V1.08... -
Page 45: Installation And Wiring
• Observe the notes and regulations regarding the power supply and functional ground. • Observer the specified bend radius when connecting cables. • Ventilation openings are not permitted to be covered or blocked. Panel PC 1200 panel mount device User's manual V1.08... -
Page 46: Requirements For The Installation Cutout
Notice! The device must ultimately be installed in a protective housing with sufficient rigidity (per UL 61010-1 and UL 61010-2-201). Panel PC 1200 panel mount device User's manual V1.08... -
Page 47: Installation Cutout
A derating of the ambient temperature of 5°C must be taken into account for all mounting orientations and diagonals starting at a wall thickness greater than 4 mm, see "Derating the ambient temperature" on page Information: A minimum circumferential distance of 30 mm must be maintained in order to enable installation with retaining clips. Panel PC 1200 panel mount device User's manual V1.08... -
Page 48: Installation For Mounting With Retaining Clips
See also: "Requirements for the installation cutout" on page Figure: Retaining clips Panel PC 1200 panel mount device User's manual V1.08... - Page 49 All the included retaining clips must be used during installation. Failure to do so can result in damage to property due to loss of leak tightness between the device and housing (pollution) or mechanical stress. Panel PC 1200 panel mount device User's manual V1.08...
-
Page 50: Installing With A Vesa Bracket
VESA 100 x 100 Notice! The following points must be observed to avoid damaging the device: • Select suitable screws (M4) according to the application. • Screw-in depth: Max. 8 mm Panel PC 1200 panel mount device User's manual V1.08... -
Page 51: Grounding Concept - Functional Ground
• Observe the shielding concept of the conductors. All data cables connected to the device must be shielded. The functional ground on the B&R device is marked with the following symbol: Legend Central grounding point Ground connection At least 2.5 mm² Panel PC 1200 panel mount device User's manual V1.08... -
Page 52: Securing The Connecting Cables
A central ground connection is available to effectively deflect interference. All cable shields must be con- nected to the grounding plate with good conductivity using cable ties or by other means. Figure 1: (symbolic image) Panel PC 1200 panel mount device User's manual V1.08... -
Page 53: Commissioning
• A USB keyboard and USB mouse are connected (optional). 6.2.2 Switching on the device Procedure 1. Connect the power supply and switch it on (e.g. power supply unit). 2. The device is operating and boots; LED Power lights up. Panel PC 1200 panel mount device User's manual V1.08... -
Page 54: Touch Screen Calibration
BIOS Setup, i.e. the value set in BIOS is used until Windows Figure 2: Adjusting boots. The value set in BIOS is only applied the first time the ADI the display brightness Control Center is launched. Panel PC 1200 panel mount device User's manual V1.08... -
Page 55: General Instructions For The Temperature Test Procedure
In order to be able to carry out temperature tests in climate chambers with fans without distorting the measurement results, however, the fan of the climate chamber must be switched off and a correspondingly long lead time (several hours) must be observed. Panel PC 1200 panel mount device User's manual V1.08... -
Page 56: Software
Entries outside a specified range of values are not applied. Default values are marked bold and italic in column "Input options" in tables. Submenus are bold in column "BIOS parameter" in tables. Panel PC 1200 panel mount device User's manual V1.08... - Page 57 Opens submenu "Hardware components" on page xyz Table 6: Main menu - Menu - Submenu(s) The 16 possible parameters are indexed from 0 to 15. Setting option "(Various)" combines different values/modes with different dependencies. Panel PC 1200 panel mount device User's manual V1.08...
-
Page 58: Bios Setup And Startup Procedure
Press once: Cursor jumps to first/last line in the display area Press twice: Cursor jumps to first/last item in the menu Changes a value (step back) Changes a value (step forward) Panel PC 1200 panel mount device User's manual V1.08... - Page 59 Alphanumeric keys Defines manual values for parameters that permit this Save and close to restore the default values. Information: All manual changes are overwritten if the default values are loaded and saved. Panel PC 1200 panel mount device User's manual V1.08...
-
Page 60: Boot Menu
Administer Secure Boot For a detailed description of this option, see the user documentation from the operating system manufacturer. Setup utility Performs advanced configurations. "Setup utility" on page Table 7: Boot menu Panel PC 1200 panel mount device User's manual V1.08... -
Page 61: Boot Manager
Software 7.1.4 Boot manager The boot manager lists all detected and bootable legacy or UEFI media. It is possible to select the media from which the boot procedure should be performed. Panel PC 1200 panel mount device User's manual V1.08... -
Page 62: Device Manager
Software 7.1.5 Device manager The device manager lists all compatible and enabled devices. BIOS parameter Setting options Description Primary video BIOS Selects the primary video BIOS Panel PC 1200 panel mount device User's manual V1.08... -
Page 63: Setup Utility
Changes can be discarded or saved here. User-specific default values can be saved and loaded here or system-optimized default values from B&R can be restored. Table 8: Boot menu - Setup utility Panel PC 1200 panel mount device User's manual V1.08... -
Page 64: Main
System time Adjusts the system time in the format hh:mm:ss System date Adjusts the system date in the format yyyy:mm:dd About this software Enter Displays the copyright disclaimer Table 9: Main Panel PC 1200 panel mount device User's manual V1.08... -
Page 65: Advanced
Enter Opens submenu "IO configuration" on page 70 Security configuration Enter Opens submenu "Security configuration" on page 73 ACPI settings Enter Opens submenu "ACPI settings" on page 73 Table 10: Advanced Panel PC 1200 panel mount device User's manual V1.08... - Page 66 Table 12: Advanced - OEM features - Super IO 7.1.6.2.1.2 H2OUVE BIOS parameter Setting options Description H2OUVE support Disabled Disables/Enables H2OUVE support Enabled Table 13: Advanced - OEM features - H2OUVE Panel PC 1200 panel mount device User's manual V1.08...
- Page 67 Delete custom boot logo Enter Deletes customized boot logos Table 17: Advanced - OEM Features - Custom boot logo If no customized boot logo is available, the B&R boot logo is used by default. Panel PC 1200 panel mount device User's manual V1.08...
- Page 68 Disables/Enables restoring BIOS settings from a backup during the next reboot The backup file must be stored in folder "XPCSET" (./XPCSET/) in the root directory of Enabled the target medium. Table 18: Advanced - OEM features - Backup settings Panel PC 1200 panel mount device User's manual V1.08...
- Page 69 Panel scaling Selects automatic, centered or stretched panel scaling Auto Centering Stretching Table 19: Advanced - Graphics configuration Graphics translation table (cf. graphics aperture/address remapping table (GART)) Dynamic video memory technology Panel PC 1200 panel mount device User's manual V1.08...
- Page 70 Gen3 Gen3: Max. 8.0 GT/s Transmitter half swing Disables/Enables transmitter half-swing Disabled Signals are transferred with a half-swing. Enabled Table 22: Advanced - PCH-IO configuration - PCI Express root port n Panel PC 1200 panel mount device User's manual V1.08...
- Page 71 Defines the DITO value [ms] Default: 625 Range: 0 to 1024 DM value Defines the DITO multiplier Default: 15 Range: 0 to 15 Table 23: Advanced - IO configuration - SATA configuration Panel PC 1200 panel mount device User's manual V1.08...
- Page 72 Enables/Disables the boot-fail pop-up (e.g. for UEFI PXE). The device tries to boot from the next boot device automatically. Enabled Table 25: Advanced - IO configuration - Miscellaneous configuration System Management Mode Panel PC 1200 panel mount device User's manual V1.08...
- Page 73 Disables native ASPM (BIOS controls ASPM) or enables it (operating system controls ASPM) Enabled Low power S0 idle capability Disabled Disables/Enables low power S0 idle capability Enabled Table 28: Advanced - ACPI settings - ACPI settings Active State Power Management Panel PC 1200 panel mount device User's manual V1.08...
-
Page 74: Security
Starts clearing TPM by enabling it Enabled Supervisor password Displays whether a supervisor password has been created Set supervisor password String Sets or changes the supervisor password Table 29: Security Trusted Platform Module Panel PC 1200 panel mount device User's manual V1.08... -
Page 75: Power
Disables/Enables thermal monitoring 1 CPU utilization is reduced by additional idle cycles to control the CPU temperature. Enabled AES-NI Disabled Disables/Enables the Advanced Encryption Standard Enabled Table 31: Power - CPU configuration Panel PC 1200 panel mount device User's manual V1.08... - Page 76 Can be used to prevent unnecessary changing Halt of C-states C-state un-demotion Disabled Disables/Enables C-state un-demotion Halt T-states Disabled Disables/Enables T-states Enabled Table 32: Power - CPU configuration - CPU power management Voltage regulator (module) Panel PC 1200 panel mount device User's manual V1.08...
-
Page 77: Boot
Enable to boot EFI devices before legacy devices. Disable to boot legacy devices before Enabled EFI devices. Timeout Delay time until the boot list is processed [s] Default: 0 Range: 0 to 99 Table 33: Boot Panel PC 1200 panel mount device User's manual V1.08... - Page 78 7.1.6.5.1.1 EFI BIOS parameter Setting options Description Enter, then: Defines the boot sequence ► Keyboard: F5/F6 ► Touch screen: Move items at the gray arrows Table 35: Boot - EFI - EFI Panel PC 1200 panel mount device User's manual V1.08...
- Page 79 Enter, then: Defines the boot sequence ► Keyboard: F5/F6 ► Touch screen: Move items at the gray arrows Table 39: Boot - Legacy - Hard disk drive - Hard disk drive Panel PC 1200 panel mount device User's manual V1.08...
-
Page 80: Exit
Load optimal defaults Enter Loads system-optimized default values Load custom defaults Enter Loads user-specific default values Save custom defaults Enter Saves user-specific default values Discard changes Enter Discards changes Table 40: Exit Panel PC 1200 panel mount device User's manual V1.08... -
Page 81: Upgrade Information
The transfer can be canceled by clicking on Cancel in dialog box "Download". This is disabled while writing to flash memory. Erasing the data in flash memory can take several seconds depending on the memory module used. During this time, the progress indicator is not updated. Panel PC 1200 panel mount device User's manual V1.08... -
Page 82: Procedure In The Efi Shell
3. Reboot the PC, open the boot menu with [Esc], [Del] or [F2] and select Internal shell as the boot device. 4. After a successful upgrade, the system must be switched off and on again for the upgrade to take effect. ✓ The upgrade is installed and in effect. Panel PC 1200 panel mount device User's manual V1.08... -
Page 83: Automatic Firmware Upgrade
• Windows 10 IoT Enterprise 2019 LTSC • B&R Linux 10 No guarantee can be given for multi-touch or single-touch operation, compatibility and functionality for operation with other operating systems and/or individual touch screen drivers. Panel PC 1200 panel mount device User's manual V1.08... -
Page 84: Operating Systems
• The version installed by B&R contains optimized settings for operation in an industrial environment. These are described in detail in the Windows 10 IoT Enterprise 2019 LTSC working guide. This contains infor- mation about installing languages, enabling lockdown and other features. Panel PC 1200 panel mount device User's manual V1.08... -
Page 85: Installation
B&R website (www.br-automation.com). It is important to ensure that "Unified Write Filter (UWF)" is disabled. Information: Necessary drivers must be downloaded from the B&R website, not from manufacturer websites. Panel PC 1200 panel mount device User's manual V1.08... -
Page 86: Activation
Windows requires SVGA resolution (800 x 600) or higher per Microsoft requirements to activate full operation of the Windows interface (e.g. with system dialog boxes). A lower resolution can be selected for applications. Panel PC 1200 panel mount device User's manual V1.08... -
Page 87: B&R Linux 10 (Gnu/Linux)
B&R Linux 10 is preinstalled at B&R on the desired data storage medium (e.g. CFast card). 7.4.2.6 Drivers The operating system contains all drivers necessary for operation. The latest versions of the B&R specific drivers can be downloaded and installed from the B&R website (www.br- automation.com). Panel PC 1200 panel mount device User's manual V1.08... -
Page 88: Automation Device Interface (Adi)
• Changing the user serial ID For a detailed description, see the user documentation for the ADI driver. Information: The functions available in the ADI Control Center depend on the device family. Panel PC 1200 panel mount device User's manual V1.08... -
Page 89: Adi Development Kit
For a detailed description of how to use ADI functions, see Automation Help. The ADI Development Kit can be downloaded at no cost from the Downloads section of the B&R website (www.br-automation.com). Panel PC 1200 panel mount device User's manual V1.08... -
Page 90: Adi .Net Sdk
For a detailed description of how to use ADI functions, see Automation Help. The ADI .NET SDK can be downloaded at no cost from the Downloads section of the B&R website (www.br-automation.com). Panel PC 1200 panel mount device User's manual V1.08... -
Page 91: Key Editor
For detailed instructions about configuring keys and LEDs and installing the key configuration on the target system, see the help documentation for the Key Editor. The Key Editor and help documentation can be downloaded at no cost from the Downloads section of the B&R website (www.br-automation.com). Panel PC 1200 panel mount device User's manual V1.08... -
Page 92: Kcf Editor
For detailed instructions about configuring keys and LEDs and installing the key configuration on the target system, see the user documentation for the KCF editor. The KCF editor and user documentation can be downloaded at no cost from the Downloads section of the B&R website (www.br-automation.com). Panel PC 1200 panel mount device User's manual V1.08... -
Page 93: Hmi Service Center
HMI Service Center USB flash drive - Hardware diagnostic soft- ware - For APC910/PPC900 - For PPC1200 - For APC2100/ PPC2100 - For APC2200/PPC2200 - For APC3100/PPC3100 - For APC mobile - For AP800/AP900 - For AP9x3/AP9xD - For AP1000/AP5000 Panel PC 1200 panel mount device User's manual V1.08... -
Page 94: Maintenance
Procedure 1. Disconnect the power supply cable to the B&R industrial PC (disconnect the power supply). 2. Loosen the Torx screw (T10) of the cover (1). 3. Remove the cover (2). Panel PC 1200 panel mount device User's manual V1.08... -
Page 95: After Changing The Cfast Card
1. After replacing, re-secure the cover of the CFast card slot. The cover must be hooked into the recesses of the housing before it is screwed on. The maximum tightening torque of the Torx screw is 0.55 Nm. Panel PC 1200 panel mount device User's manual V1.08... -
Page 96: Changing The Battery
3. Carefully open the tab of the battery holder with a flat-blade screwdriver (1) and fully straighten the tab until it forms a 90° angle with the device (2). 4. Pull the battery holder out of the device by the tab (3). Panel PC 1200 panel mount device User's manual V1.08... - Page 97 7. Reset the date and time in BIOS. ✓ The battery change is completed and the device is ready for operation. Warning! Lithium batteries are hazardous waste! Used batteries must be disposed of in accordance with local regulations. Panel PC 1200 panel mount device User's manual V1.08...
-
Page 98: Cleaning
• The cleaning agent is not permitted to be applied directly to the device. Abrasive cleaners, aggressive solvents and chemicals, compressed air or steam cleaners are not permitted to be used. Information: Displays with a touch screen should be cleaned at regular intervals. Panel PC 1200 panel mount device User's manual V1.08... -
Page 99: Pixel Errors
Repairs are therefore only permitted to be carried out by authorized qualified personnel at the manufacturer's premises. To process a repair/complaint, a repair order or complaint must be created via the B&R Material Return Portal on the B&R website (www.br-automation.com). Panel PC 1200 panel mount device User's manual V1.08... -
Page 100: Accessories
0.20 to 0.25 Nm 0.22 to 0.25 Nm Electrical properties Nominal voltage 300 V Nominal current The respective limit values of the Power Panel or Panel PC must be taken into account! Panel PC 1200 panel mount device User's manual V1.08... -
Page 101: Replacement Parts
Accessories 9.2 Replacement parts The following replacement parts are available for the B&R Panel PC 1200. Order number Short description Figure Accessories 5ACCRHMI.0018-000 HMI C80/PPC1200 battery compartment - 1x battery holder C80/PPC1200 - 1x battery including circuit board 9.2.1 5ACCRHMI.0018-000 - Technical data... -
Page 102: International And National Certifications
EN 61000-6-4:2007 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission stan- dard for industrial environments Information: The declarations of conformity are available on the B&R website under Declarations of conformity. Panel PC 1200 panel mount device User's manual V1.08... -
Page 103: Certifications
Products with this mark are tested by an accredited test laboratory and certified by the ACMA. The mark is valid for Australia/Oceania and facilitates the certification of your machines and systems in this economic area (based on EU conformity). Panel PC 1200 panel mount device User's manual V1.08... -
Page 104: Environmentally Friendly Disposal
Operating and monitoring devices Uninterruptible power supplies Batteries and rechargeable batteries Cables Paper/Cardboard packaging Paper/Cardboard recycling Plastic packaging material Plastic recycling Disposal must be carried out in accordance with applicable legal regulations. Panel PC 1200 panel mount device User's manual V1.08... -
Page 105: Mtcx
. The version can be read in BIOS or in approved Microsoft Windows operating systems using the ADI Control Center. Available for download from the Downloads section of the B&R website (www.br-automation.com). Panel PC 1200 panel mount device User's manual V1.08... -
Page 106: Viewing Angles
The viewing angles are specified for the horizontal (L, R) and vertical (U, D) axes in reference to the vertical axis of the display. The specified viewing angles above always refer to the standard mounting orientation of the respective Power Panel. Panel PC 1200 panel mount device User's manual V1.08... -
Page 107: Projected Capacitive Touch (Pct)
• Isopropanol • Gear oil • Tea • Hexane • Antifreeze • Lubricating grease • Turpentine • Ammonia-based glass cleaner • Cooking oil • Mineral spirit • Washing agents • Salt Panel PC 1200 panel mount device User's manual V1.08...
Need help?
Do you have a question about the PC 1200 and is the answer not in the manual?
Questions and answers