Table of Contents
Advertisement
Chapter 4. Using the CD-4070NW
3
Gently open the document eject tray extension toward you.
4
Attach the document eject guide to the document eject tray
extension in the order illustrated.
Install it so that the ( ) mark on the
guide is aligned with the ( ) mark on
the body.
5
To remove the document eject guide, follow the above
procedure in reverse.
NOTE
• After the original eject guide is set in place, the method of
scanning is the same as when you make regular scans.
However, note that particularly thick and rigid documents
may not stack on the extension easily. In this case, we
recommend removing the document eject guide before use.
• Before you close the document eject tray extension or paper
feed tray, be sure to remove the document eject guide.
30
Hide quick links:
Advertisement
Table of Contents
