Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Gronomics Manuals
  4. Lawn and Garden Equipment
  5. MRGW 34-48
  6. Assembly instruction

Gronomics MRGW 34-48 Assembly Instruction

Modular rustic garden wedge
Hide thumbs
1
2

Advertisement

Quick Links

Download this manual
1
Parts Identifi cation
Stack matching pieces in piles. Using the parts list, locate and count
the individual pieces and verify that you have received the correct
number of pieces.
If any pieces are missing or replacement parts are required, contact
Gronomics at 1-855-299-6727.
NOTE: It is recommended to place a protective layer between
the ground and the pieces during assembly. This will help prevent
damage to the pieces.
ITEM
QTY.
1
4
2
8
3
2
4
2
5
2
6
2
7
2
8
1
9
4
10
1
2
Post Assembly
Place two 3-1/4" x 3-1/4" x 41-1/4" corner posts (Item 1)
together as shown.
Repeat procedure for the two remaining corner posts.
Packaged & Inspected by:
www.gronomics.com
PART #
DESCRIPTION
CP41
Corner Post, 3-1/4" x 3-1/4" x 41-1/4"
R4501
Front & Back Side Rails, 45" x 5-5/8 x 13/16"
ES2613L
End Side Rails, 26-3/8" x 5-1/2" x 13/16"
ES2013
End Side Rails, 20-1/4" x 5-1/2" x 13/16"
ES1313
End Side Rails, 13.7/8" x 4-3/8" x 13/16"
ES0713
End Side Rails, 7-3/4" x 5-1/2" x 13/16"
SH43
Shelves, 43-3/4" x 5-1/2" x 1-3/8"
BCR43
Bottom Center Rail, 43-3/8" x 2-1/2" x 13/16"
R3100
Post Cap, 4-5/8" x 4-5/8" x 1-1/2"
FL3652
Fabric Liner, 36" x 52"
East Bethel, MN USA
Modular Rustic Garden Wedge
(34"W x 48"L x 32"H - 18D) Assembly Instruction
2
1
Parts List
MRGW 34-48
7
3
4
8
5
6
9
10
10
1
Date:
Continued
763-753-7374

Advertisement

loading
Need help?

Need help?

Do you have a question about the MRGW 34-48 and is the answer not in the manual?

Questions and answers

Related Manuals for Gronomics MRGW 34-48

Summary of Contents for Gronomics MRGW 34-48

  • Page 1 Modular Rustic Garden Wedge (34”W x 48”L x 32”H - 18D) Assembly Instruction Parts Identifi cation MRGW 34-48 Stack matching pieces in piles. Using the parts list, locate and count the individual pieces and verify that you have received the correct number of pieces.
  • Page 2 Remove the rubber cap from the post studs. Align the hole of the 4” x 4” post cap (Item 9) with stud and tighten until the post cap makes contact with the post. Do not overtighten. Stud www.gronomics.com East Bethel, MN USA 763-753-7374...