Gronomics MRGB-2L 48-48 Assembly Instruction

Gronomics MRGB-2L 48-48 Assembly Instruction

Modular raised garden bed

Advertisement

1
Parts Identifi cation
Stack matching pieces in piles. Using the parts list,
locate and count the individual pieces and verify that
you have received the correct number of pieces.
If any pieces are missing or replacement parts are required,
contact Gronomics at 1-855-299-6727.
NOTE: Ground preparation is optional, however we
recommend leveling area under frame of product, or
place product directly on a flat level surface before
filling with soil.
ITEM
QTY.
4
1
2
7
3
1
Product Care & Maintenance - Western Red Cedar will turn a weathered grey if left unfinished. Although no finish is required for
cedar products when used outdoors, a natural oil finish applied regularly will help maintain the beauty and minimize cracking and
drying. It is recommended to use Gronomics Garden Bed Oil (Item # GBO-1Q), anon-toxic, food safe finish that is very easy to
apply. Apply Oil when air and wind temperatures are between 50-90degrees. Avoid applying in direct sunlight
2

Side Rail Assembly

Stand two 4" x 4" x 13" corner posts (Item 1) upright.
Install a 45" x 5-1/2 " side rail (Item 2) into the slots and slide
down.
Repeat procedure for the two remaining corner posts and
45" x 5-1/2 " side rail.
Packaged & Inspected by:

Parts List

PART #
DESCRIPTION
R1300
Corner Post, 4" x 4" x 13"
Side Rail, 45" x 5-1/2" x 7/8"
R4500
Side Rail w/Logo, 45" x 5-1/2" x 7/8"
R4500L
Modular Raised Garden Bed
(Two Level 48" x 48" x 13") Assembly Instruction
1
1
East Bethel, MN USA
Item #: MRGB-2L 48-48
2
2
Date:
3
1
Continued
763-753-7374

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MRGB-2L 48-48 and is the answer not in the manual?

Questions and answers

Summary of Contents for Gronomics MRGB-2L 48-48

  • Page 1 It is recommended to use Gronomics Garden Bed Oil (Item # GBO-1Q), anon-toxic, food safe finish that is very easy to apply.
  • Page 2 End Rail Assembly Install two 45” x 5-1/2” side rails (Item 2) into the slots and slide down. Final Side Rail Assembly Install the remaining three 45” x 5-1/2 “ side rails (Item 2) and one side rail w/logo (Item 3) into the slots and slide down.

Table of Contents