Operating Mode "Access Point - Weinzierl KNX IP Interface 740.1 wireless Operation And Installation Manual

8.5 Operating mode "Access point"

Authentification
The Wi-Fi encryption can be activated/deactivated via the authentification parameter.
The choices are:
▪
None
The installer can connect to the Wi-Fi without entering a password.
The Wi-Fi is not encrypted.
▪
WPA2-PSK
As encryption standard WPA2-PSK (Wi-Fi Protected Access 2, pre-shared-key) is used.
Key (only for WPA2-PSK, 63 characters)
The key used must be entered here (8 ... 63 characters). This must also be entered in the Wi-Fi
client (PC) when establishing the Wi-Fi connection.
Wi-Fi channel
The used Wi-Fi channel is configured here.
Example: Authentification
To ensure a high level of security, the key should be at least 10 characters long. Also it should
contain upper and lower case letters as well as special characters and numbers.
Device name (SSID): KNX IP Interface 740.1
Authentification: WPA2-PSK
Key: iEn49*s/kP
© 2021 WEINZIERL ENGINEERING GmbH Seite 18/20