6.2.6 Sensitivity Setting
The sensitivity is about 0% to 2% when the sensor is in the air (without contact with any
material), and increases depending on the material that it comes in contact with. The
minimum is 2%, the maximum is 98%, the minimum span is 1%.
6.2.7 Common Material Selection
Select the sensitivity using the built-in or a saved common material list.
1. Connect to the sensor (click "Link" to change the button into "Stop").
2. Stop syncing (click "Stop Sync" to change the button into "Sync").
3. Click the common material drop-down list. The sensitivity parameter setting will be
automatically applied after selection.
4. Start syncing (click "Sync" to change the button into "Stop Sync").
6.3 Advanced Settings
6.3.1 Advanced Setting Buttons
2
3
4
5
6
1
7
9
10
13
14
8
11
12
15
15