Download Print this page
Fimco SK-61-12V-TSC Assembly / Operation Instructions / Parts

Fimco SK-61-12V-TSC Assembly / Operation Instructions / Parts

12 volt skid mounted lawn & garden sprayer

Advertisement

Quick Links

12 VOLT SKiD MOuNTED LAWN & GARDEN SPRAYER
ASSEMBLY / OPERATION INSTRUCTIONS / PARTS
BEFORE RETuRNiNG THiS PRODuCT
FOR ANY REASON, PLEASE CALL
1-800-831-0027
iF YOu SHOuLD HAVE A QuESTiON OR
EXPERiENCE A PROBLEM WiTH YOuR
FiMCO iNDuSTRiES PRODuCT:
1-800-831-0027
BEFORE YOu CALL, PLEASE HAVE THE
FOLLOWiNG iNFORMATiON AVAiLABLE:
SALES RECEiPT & MODEL NuMBER. iN MOST
CASES, A FiMCO iNDuSTRiES EMPLOYEE CAN
RESOLVE THE PROBLEM OVER THE PHONE.
GENERAL iNFORMATiON
The purpose of this manual is to assist you in operating your
sprayer. Please read it carefully as it furnishes information
which will help you operate and maintain your sprayer.
WARNiNG
DO NOT uSE PuMP iN AN EXPLOSiVE
ENViRONMENT. DO NOT uSE TO PuMP
FLAMMABLE FLuiDS, GASOLiNE,
KEROSENE FuEL, OiL, ETC.
WARRANTY / PARTS / SERViCE
Products are warranted for one year from date of purchase
against manufacturer or workmanship defects.
2135827
MODEL NO. SK-61-12V-TSC
Your authorized dealer is the best source of replacement
parts and service. To obtain prompt, efficient service, always
remember to give the following information.
. Correct part description and part number.
2. Model number of your sprayer.
3. Serial number of your sprayer.
Part number and descriptions can be obtained from the
illustrated parts list section of this manual. Whenever you
need parts or repair service, contact your distributor / dealer
first. For warranty work always take your original sales
slip, or other evidence of purchase date, to your distributor
/ dealer.
• 60 Gallon Polyethylene Tank
• 2 Volt Diaphragm Pump - 2. G.P.M.
• Adjustable Pressure Range 0 - 60 P.S.I.
• 25 Foot Handgun Hose
• Pistol Grip Handgun
• Suction Line Filter
• Optional Trailer & Boom Kits Available
The sprayer is fully assembled at the factory. The only as-
sembly necessary is to thread the pressure gauge in place,
and to hook up the wiring to an existing 12 volt power source.
The red wire of the two wire set must be connected to the
positive post on the battery or the "Hot" connection on a
switch or to the ammeter. The brown wire may be grounded
or connected to the negative battery post.
The pump on the sprayer is factory set to shut off automati-
cally at a maximum of 60 PSI. The handgun or optional
boom may be shut off at anytime when the pump system
is running. Pressure may be decreased by opening the
regulating valve. The more it is opened the lower the pres-
sure will be. The pump will not shut down as long as the
regulating valve is open.
TECHNiCAL SPECiFiCATiONS
ASSEMBLY
OPERATiON
w w w . F I M C O I N D U S T R I E S . C O M
1000 FIMCO LANE • P.O. BOX 1700 • NO. SIOUX CITY, SD 57049
TOLL FREE: 800-831-0027 • TOLL FREE FAX: 800-494-0440
Form No. 1119
(5004709
Page 
3/07)
Printed In U.S.A.

Advertisement

loading

Summary of Contents for Fimco SK-61-12V-TSC

  • Page 1 . F I M C O I N D U S T R I E S . C O M WARRANTY / PARTS / SERViCE 1000 FIMCO LANE • P.O. BOX 1700 • NO. SIOUX CITY, SD 57049 Products are warranted for one year from date of purchase TOLL FREE: 800-831-0027 •...
  • Page 2 CAuTiON The pumping system draws solution from the tank, through the strainer, and to the pump. The pump forces the solution PRESSuRE SWiTCH OPERATiON under pressure to the handgun. Pressure switch is pre-set at the factory. improper adjustment of the pressure switch, may cause severe overload or premature failure.
  • Page 3 Page 3...
  • Page 4 Page 4...