Advertisement
2. FEATURES
The HA-1010 is long range speaker slim array is composed of multiple horn speaker positioned in an array. It features
long-range sound coverage further than conventional horn speakers, narrowly focused vertical directivity that allows
excessive volume to be controlled at closer proximity, and form a continuous linear sound source, achieving uniform sound
pressure with less attenuation due to distance.
3. INSTALLATION PRECAUTIONS
• This long range slim array speakers have
feature a drain hole built into same panel
that holds the speaker cord. For proper
drainage, when installation please ensure
that this panel faces down toward the
ground or follow the instruction of direction
label at the rear case.
• When using the other bracket, please to use
TOA's optional bracket solely designed for
MAKE SURE THAT SPEAKER IS MOUNTED
WITH THE SIDE INDICATED BY THE ARROW UP.
IF THE SPEAKER MOUNTED UPSIDE DOWN.
mounting this speaker or it must have
RAINWATER GE T S INTO THE SPEAKER FROM
DRAIN HOLE ON THE BOT T OM PL ATE.
CAUSING BREAKDOWNS OR ACCIDENTS.
strength enough to stand the speaker
WHEN MOUNTING. BE SURE TO USE TOA'S
OPTIONAL BRACKET SOLELY DESIGNED FOR
weight.
MOUNTING THIS SPEAKER. WHEN USING
OTHER BRACKET. IT MUST HAVE STRENGTH
ENOUGH TO STAND THE SPEAKER WEIGHT.
3. INSTALLATION
Make the sign for drill guide at the surface or
Step 1.
location that can structurally support the weight
of the speaker. Prepare the proper dyna bolt
that suitable with hole of bracket. Dimensions
of sign for drill guide and hole of bracket as
shown in the picture.
Holes bracket
4 -
9
Ø
Mounting Bracket
(accessory)
Drill the surface that have been marked, install
Step 2.
the proper dyna bolt then the both of top and
bottom bracket.
Note
Dyna bolts and nuts are not provided.
Mounting surface
Nut
Mounting Bracket
(accessory)
Dyna bolt
Drain hole
Case
Speaker cord
50
Unit: mm (in)
(1.97")
Guide for
top bracket
Surface for drill
Guide for
bottom bracket
50
(1.97")
Install the long range slim array to the bracket
Step 3.
that have been installed to the mounting surface
using supplied hexagon bolt, washer, and spring
washer to top and bottom bracket.
Top bracket
Hexagon bolt M8 x 20
Spring washer (for M8)
Washer (for M8)
HA-1010
Note
When the speaker installation need slope angel, use the
optional Q-HA-1100 speaker bracket.
4. SPEAKER CORD COLOR CODING
Line voltage
Rated input
Impedance
HOT
Cord color coding
COM
Speaker cord
For connections,
refer to the table.
5. WIRING DIAGRAM
Wiring diagram
8Ω
8Ω
8Ω
16Ω
170Ω
BLUE
83Ω
BLACK
COM
0
WHITE
Washer (for M8)
Spring washer (for M8)
Hexagon bolt M8 x 20
Bottom bracket
70V LINE
100V LINE
60W
30W
60W
170Ω
170Ω
83Ω
BLACK
BLUE
BLUE
WHITE
WHITE
WHITE
8Ω
8Ω
8Ω
8Ω
8Ω
Advertisement
