Safety And Regulations - QYSEA FIFISH Quick Start Manual

Safety and Regulations

Operating FIFISH products requests training and practice. Please read
through this document before operating in water.
1. Unauthorized disassembly of any parts is prohibited.
2. Please ensure that you install and connect the AC power system after the ROV is
powered off.
3. Check if any damges in OPSS or E-Tank.
4. Check and keep both the communication interface and tether interface dry and clean,
Salt and moisture may cause corrosion of the connector interface.
5.Check if AC input cable damage or not.
6.Please keep the power switch off during take-up and pay off the cable.
7.Pay attention to check whether the O-ring is on the connection cable connector. If it is
missing or broken, please replace it in time.
8.Not recommended that OPSS and diver work underwater at the same time.
9. Pay attention to the conditioning of the Power indicator during uses.
10. Do not put heavy objects on OPSS-PM.
11.Do not make OPSS-PM in wet conditioning.
1