Table of Contents
Advertisement
Maintenance
After-Dive:
1.Please turn off the OPPSS-PM first, then unplug the AC Plug, finally power off the RC.
2.Unplug the connecting tethers from corresponding socket.
3.Take off the E-tank from ROV. (You can keep the OPSS ROV mount installing for next diving.
4.Check if there any connectors got water ingress or damage, make it dry and clean
and then put on the special waterproof cap if everything normal. Please contact
support if damaged.
5. Put every accessories back on the Protecting Box.
Note:
Please make accessories of OPSS in designated space, do not squeeze or pull the
tethers violently to avoid damage.
11
Advertisement
Table of Contents
