Table of Contents
Advertisement
Connection
Plug the 3.5 mm end of OPSS Spool to FIFISH RC
1.
2.Connect the AC input cable and Output tether on the OPSS-PM Twist the caps to secure
the water-proof
3.Slid the E-Tank on OPSS ROV Mount（refer to the E-Tank installation description of on
pages P9 and P10）
4.Hook the securing loop on the rear wing and Connect the E-Tank's ROV Plug (black cable)
to ROV Tether Port
5.Connect to wall socket
6.Press the power button to turn ON
7.The status LED will flash 3 times (Red, Green, Red), the working status is showing
Note: 1.If the indicator shows wrong color, please turn it off and cut off power.
2.Please don not expose the E-tank under sunshine for more than 5 minutes when
red statically
the OPSS is power on.
10
Advertisement
Table of Contents
