Table of Contents
Advertisement
Maintenance
1. Check each connection plug for damage or water ingress after every dive.
2. Check O-ring for damage after every dive.
3. Check the tether after every dive.
4. Clean Electric Power Tank with clean fresh water after every dive.
5. Check OPSS Power Management switch key is in good condition.
6. Check the tether on regular basis, replace the tether if break or damage appears.
Note：
Do not wash the OPSS Spool with water directly. You can use towel to make it clean,
and do keep the OPSS Spool dry.
12
Advertisement
Table of Contents
