ShelterLogic 12'x20'x8' Manual

ShelterLogic 12'x20'x8' Manual

Advertisement

Quick Links

ATTENTION:
This shelter product is manufactured with quality materials. It is designed to fit the ShelterLogic
ShelterLogic
Shelters offer storage and protection from damage caused by sun, light rain, tree sap, animal - bird excrement
®
, LLC
and light snow. Please anchor this ShelterLogic
keeping cover tight and free of snow and debris is the responsibility of the consumer. Please read and understand the installation detail,
warnings and cautions prior to beginning installation. If you have any questions call the customer service number listed below. Please
refer to the warranty card inside this package.
DANGER:
Prior to installation, consult with all local municipal codes regarding installation of temporary shelters.
Choose the location of your shelter carefully. DANGER: Keep away from electrical wires. Check for
overhead utility lines, tree branches or other structures. Check for underground pipes or wires before
you dig. DO NOT install near roof lines or other structures that could shed snow, ice or excessive run
off onto your shelter. DO NOT hang objects from the roof or support cables.
WARNING:
Risk of fire. Do not smoke or use open flame devices (including grills, fire pits, deep fryers, smokers or
lanterns) in or around the shelter. DO NOT store flammable liquids (gasoline, kerosene, propane, etc.) in
or around your shelter. Do not expose top or sides of the shelter to open fire or other flame source.
CAUTION:
Use CAUTION when erecting the frame. Use safety goggles during installation. Secure and bolt together
overhead poles during assembly. Beware of pole ends.
PROPER ANCHORING AND INSTALLATION OF FRAME:
PROPER ANCHORING OF THE FRAME IS THE RESPONSIBILITY OF THE CONSUMER.
ShelterLogic
is not responsible for damage to the unit or the contents from acts of nature. Any shelter that is not anchored
®
, LLC
securely has the potential to fly away causing damage, and is not covered under the warranty. Periodically check the anchors to ensure
stability of shelter. ShelterLogic
quickly removed and stored prior to severe weather conditions. If strong winds or severe weather is forecast in your area, we recom-
mend removal of cover.
REPLACEMENT PARTS, ASSEMBLY, SPECIAL ORDERS:
Genuine ShelterLogic
®
, LLC
application, replacement covers, wall and enclosure kits, vent and light kits, frame parts, zippered doors and other accessories. All
items are shipped factory direct to your door.
Questions - claims - special orders? call our customer service Hotline:
u.s. customer service: 1-800-524-9970 international customer service: 001-860-945-6442 canada customer service: 1-800-559-6175
Hours oF operation: mon-Fri 8:30am-8:00pm est, sat-sun 8:30am-5:00pm est.
CARE AND CLEANING:
A tight cover ensures longer life and performance. Always maintain a tight cover. Loose fabric can accelerate
deterioration of cover fabric. Immediately remove any accumulated snow or ice from the roof structure with a
broom, mop or other soft-sided instrument.
remove from outside the structure. DO NOT use hard-edged tools or instruments like rakes or shovels to
remove snow. This could result in punctures to the cover. DO NOT use bleach or harsh abrasive products to
clean the fabric cover. Cover is easily cleaned with mild soap and water.
WARRANTY:
This shelter carries a full limited warranty against defects in workmanship. ShelterLogic
properly used and installed, the product and all associated parts, are free from manufacturer's defects for a period of:
1 YEAR FOR COvER FABRIC, END PANELS AND FRAMEwORk
Warranty period is determined by date of shipment from
reseller, (please save a copy of your purchase receipt). If this product or any associated parts are found to be defective or missing at the time of receipt,
ShelterLogic
®
, LLC will repair or replace, at it's option, the defective parts at no charge to the original purchaser. Replacement parts or repaired parts
shall be covered for the remainder of the Original Limited Warranty Period. All shipping costs will be the responsibility of the customer. Parts and replace-
ments will be sent C.O.D. You must save the original packaging materials for shipment back. If you purchased from a local dealer, all claims must have a
copy of original receipt. After purchase, please fill out and return warranty card for product registration. Please see warranty card for more details.
Covered by U.S. Patents and patents pending: 6,871,614; 6,994,099; 7,296,584; D 430,306; D 415,571; D 414,564; D 409,310; D 415,572
structure properly. See manual for more anchoring details. Proper anchoring,
®
, LLC
cannot be responsible for any shelter that blows away. NOTE: Your shelter's cover can be
®
, LLC
replacement parts and accessories are available from the factory, including anchoring kits for nearly any
Use extreme caution when removing snow from cover- always
ShelterLogic
®
, LLC
®
, LLC for factory direct purchases or date of purchase from an authorized
Page 1
custom fabric cover included.
®
, LLC
warrants to the Original Purchaser that if
05-201113-0E

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 12'x20'x8' and is the answer not in the manual?

Questions and answers

Summary of Contents for ShelterLogic 12'x20'x8'

  • Page 1 ATTENTION: This shelter product is manufactured with quality materials. It is designed to fit the ShelterLogic custom fabric cover included. ® , LLC ShelterLogic Shelters offer storage and protection from damage caused by sun, light rain, tree sap, animal - bird excrement ®...
  • Page 2 1. ASSEMBLE END RIB Secure all bolts with 1/4" Nuts (01010) 3" Bolts 10224 10225 10210 10226 10226 2" Bolts 10114 2. ASSEMBLE MIDDLE RIBS 3" Bolts 10224 10225 802630 2" Bolts 10273 10114 10273 Base Feet assembly 10273 01010 10270 10270 10270...
  • Page 3 3. ATTACH CROSS RAILS AND WIND BRACES 020230 end rib shelterlock ™ assembly CROSS RAILS 10210 800260 10205 WIND BRACES 01010 ShelterLocks and Cross Rail ™ COvER CROSS RAILS Poles attach to inside of frame. 10110 Use 020230 to connect end rib cross rail clamps Front end rib.
  • Page 4 5. ATTACH TOP CROSS RAILS Install the top cross rail over the middle ribs and underneath end ribs. top cross rail under end ribs 020231 10210 020230 10225 10224 020230 020230 020230 at Front End Rib 020231 01010 at Back End Rib 020230 top cross rail over middle ribs 802630...
  • Page 5 6. SqUARING UP THE FRAME A. Place frame in its final location, which needs to be as flat and level as possible. B. Measure across opposite corners. These distances must be equal to within 1". C. Check that the front and rear of the frame measures 12' in width. 7.
  • Page 6 7. DOOR AND SOLID END PANEL INSTALLATION A. Hold end panel at the top center with white inner surface facing inside of the shelter. Wrap the edges of the fabric panel around the end rib and pass the rails through the pre made slits in the fabric. B.
  • Page 7 C. Disassemble cover rails and slide through fabric pockets at each leg and reattach with clamps to each leg. Repeat this on other side. Push down on cover rails to tighten cover, before tightening bolts completely. D. Check and tighten Ratchets and Cross Rails monthly to ensure the cover is tight. NOTE: The ShelterLogic logo should ®...

Table of Contents

Save PDF