Advertisement
PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
•
This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
•
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
Careless installation and operation can result in equipment damage
•
Requirement
Working CD changer or Active Sirius subscription*
Introduction
Many Chrysler vehicle owners looking for an easy and simple way to play audio
devices while keeping factory audio system will be thrilled to find this adapter. If
vehicle has a remote/external CD changer or active Sirius subscription, the
A2D-CHRY02 module provides a wireless music streaming solution for any
smartphone, tablet, with A2DP profile all without sacrificing the remote/external
CD changer or active Sirius subscription.
A wireless connection means no wires, clutter or complicated setup. The A2D-
CHRY02 connects to the 10-pin port which guarantees to best possible sound.
Warning: Sirius subscription must be active or vehicle must have a
remote CD changer or RSE.
Vehicle must have at least one (CD changer, RSE or ACTIVE Sirius radio
subscription) for this module to work as described. Don't ignore this warning!!
See Frequently Asked question at the end of this guide for details.
Installation
.
Radio removal required to gain access to connectors. Vehicle specific
radio removal is not part of this guide; however, they may be available upon
request.
With radio out;
Disconnect 10-pin plug (See Fig. 1) from radio (See Fig.2)
1.
Connect factory 10-pin plug module 10-pin connector (See Fig. 3)
2.
Connect module to 10-pin plug (See Fig. 1) to radio 10-pin connector
3.
(See Fig. 2)
Fig. 1
10-pin plug
Fig. 2
Advertisement
