Table of Contents
Advertisement
3. Disassembly and Reassembly
3-6 Removing Heater-Bake
Parts
Heater-Bake
* Reassembly of All part is the reverse order of disassembly.
Screw
- Terminal Block Screw : M4 X 18.
- The others : M4 X 12.
Explanation Photo
Explanation
1.
Unplug range or disconnect power.
2.
Pull the range out of its mounting location so that
you can access the rear of the unit.
3.
Remove Cover-Back Main Wire.
(See step 3 on page 10 for procedure)
4.
Remove Terminal-Block and Bracket-Cover
Access(with Adiabatic-Terminal) by unscrew
2 points.
5.
Unscrew 2 points of Heater-Bake.
6.
Cut the Adiabatic-Rear based on the lower side.
7.
Carefully pull out Heater-Bake and replace it.
17
Hide quick links:
Advertisement
Table of Contents
